WIZnet

WIZnet W5100 Network Module with Mag Jack - WIZ811MJ

DEV-09473

Ny vare

There is no on-board regulation, so you’ll need to supply clean/regulated power sources. All pins of the W5100 are broken out to two pairs of 10-pin, 0.1" pitch headers.

Flere detaljer

Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/9473

Få en mail når varen er på lager
Du får en mail så snart varen er på lager

278,60 kr

Yderligere information

WIZnet’s WIZ811MJ works as a breakout board for their W5100 embedded TCP/IP chip. Also included on the board is an RJ-45 MagJack connector (RJ45 with X’FMR). It can be used as a component and little effort is required to interface to the W5100. The WIZ811MJ is an ideal option for users who want a simple solution to adding TCP/IP capability to their project.

For detailed information on implementation of Hardware TCP/IP, refer to the W5100 Datasheet.

Features:

  • Supports 10/100 Base TX
  • Supports half/full duplex operation
  • Supports auto-negotiation and auto cross-over detection
  • IEEE 802.3/802.3u Compliance
  • Operates 3.3V with 5V I/O signal tolerance
  • Supports network status indicator LEDs
  • Includes Hardware Internet protocols: TCP, IP Ver.4, UDP, ICMP, ARP, PPPoE, IGMP
  • Includes Hardware Ethernet protocols: DLC, MAC
  • Supports 4 independent connections simultaneously
  • Supports MCU bus Interface and SPI Interface
  • Supports Direct/Indirect mode bus access
  • Supports Socket API for easy application programming
  • Interfaces with two 2.54mm pitch 2 x 10 header pin
  • Temperature : 0 ~ 70°C (Operation), -40 ~ 85°C (Storage)

Dimensions:

  • Board: 55.5x25x23.5 (W x H x D)

Documents:

Varetilpasning

Når du har gemt din kundetilpassede vare, skal du huske at tilføje den til din kurv.

loader

* obligatoriske felter