Teensy

Teensy
Udvikling Teensy til dit Elektronik projekt

Teensy 12 varer

Viser 1 - 12 af 12
  • 311,80 kr På lager 1-2 dage

    The Teensy++ comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program the Teensy in your favorite IDE using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!

    311,80 kr
    På lager 1-2 dage
  • 278,60 kr På lager 1-2 dage

    The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32-bit, 120MHz processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I

    278,60 kr
    På lager 1-2 dage
  • 345,00 kr På lager 1-2 dage

    The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32-bit, 180MHz processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I

    345,00 kr
    På lager 1-2 dage
  • 238,80 kr På lager 1-2 dage

    The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface!...

    238,80 kr
    På lager 1-2 dage
  • 16,10 kr På lager 1-2 dage

    Note: This Header Kit can also be used for the Teensy 3.0 and 3.1, as the pin layout has not changed between the three versions.

    16,10 kr
    På lager 1-2 dage
  • 108,80 kr 112 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    This low-cost (LC) Teensy Prop Shield is meant for making light and sound effects on small, handheld props and wearable costumes. This shield features a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. This economical board is approximately the size of a Teensy, just slightly longer to allow space for mounting holes...

    108,80 kr
    112 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 331,70 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/14056

    The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32-bit, 120MHz processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I

    331,70 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/14056
  • 152,60 kr 457 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    The Teensy LC comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!

    152,60 kr
    457 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 99,50 kr 46 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Not only does the Teensy 3.1 XBee Adapter connect a XBee and Teensy together, it also acts as a breakout board for both. Each pin on the Teensy and XBee has been broken out to standard 0.1" spaced through hole soldering points that allow you to connect any additional parts that you would like to incorporate with the adapter.

    99,50 kr
    46 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 252,10 kr 70 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    The Teensy Prop Shield’s crowning glory is, of course, its Freescale 10DoF sensors. The board’s sensor suite comprises an FXOS8700CQ 6-axis linear accelerometer and magnetometer, an FXAS21002C 3-axis digital angular rate gyroscope and an MPL3115A2 precision pressure/altitude and temperature gauge.

    252,10 kr
    70 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 398,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/14058

    The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32-bit, 180MHz processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I

    398,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/14058
  • 185,70 kr 31 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    The Teensy Audio board utilizes the SGTL5000 stereo codec with headphone amp IC to decode and drive audio files and the Cortex-M4 DSP instructions from the Teensy dev board to provide power to a real-time FFT. Each board is also equipped with 3.5mm audio jack for headphones, a micro-SD card slot for storing audio files, and optional spaces for a 25k...

    185,70 kr
    31 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
Viser 1 - 12 af 12