Sensorer

pH Sensor Kit

SEN-10972

Ny vare

All you need to do is follow the included instructions for calibrating the probe and connect it to the included pH Circuit. The pH Circuit outputs data from the probe over serial, so it couldn’t be much easier to use.

Flere detaljer

135 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

Få en mail når varen er på lager
Du får en mail så snart varen er på lager

1 791,50 kr

Yderligere information

Need to measure precise pH? This kit includes everything you need including buffer solutions for calibration, pH probe, and even a board to connect directly to your favorite microcontroller. This is laboratory-grade equipment and not just a toy or educational kit.

Includes:

  • 125ml Red Buffer Solution - pH 4.0
  • 125ml Yellow Buffer Solution - pH 7.0
  • 125ml Blue Buffer Solution - pH 10.0
  • 125ml Storage Solution
  • pH Probe
  • pH Circuit
  • BNC Connector

Features:

  • pH probe
    • pH Range: 0-14 (Na+ error at >12.3 pH)
    • Speed of Response: 95% in 1 second
    • Isopotential point: pH 7.00 (0 mV)
    • Offset: +/- 0.20 pH
  • 3 buffer solutions and storage solution
  • 38400 baud rate default

Documents:

Varetilpasning

Når du har gemt din kundetilpassede vare, skal du huske at tilføje den til din kurv.

loader

* obligatoriske felter