Hjul

Wheel 42x19mm

ROB-08899

Ny vare

This rugged wheel is designed to fit securely on the output shafts of the micro and mini metal geramotors. These gearmotors should be mounted onto the side of the hub with the protruding teeth. The output shaft will slide into the socket easily at first but will achieve a snug fit when pressed through to the other edge of the hub.

Flere detaljer

22 Styk på på fjernlager, bestil før Fredag kl 14 og modtag denne varer Onsdag ugen efter

Få en mail når varen er på lager
Du får en mail så snart varen er på lager

69,50 kr

Yderligere information

This custom-designed plastic wheel from Pololu has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our micro and mini metal gearmotors as well as the Solarbotics metal gear motors. Teeth on the hub optionally allow a reflectance sensor to be used for encoder feedback.

The output shafts on the Solarbotics metal gear motors will also fit these wheels, but because they are shorter they will have to be mounted onto the other side of the wheel where the fit is tighter.

The Micro Metal Gearmotor Bracket Extended is specifically designed to work with this wheel. Please note that the non-extended version of our mounting bracket will not work well with this wheel.

Sold in pairs. You get two wheels.

Varetilpasning

Når du har gemt din kundetilpassede vare, skal du huske at tilføje den til din kurv.

loader

* obligatoriske felter