Robotbyg / Mekanik

Robotbyg / Mekanik
Her finder du færdige robotter, kørende platforme og Mekaniske byggedele til at bygge din egne robot eller maskine.

Robotbyg / Mekanik 515 varer

Underkategorier

Viser 1 - 515 af 515
  • 16,10 kr På lager 1-2 dage

    Have you heard the story of how our other Zinc plated nuts come only from some sort or “metal tree” or how their dimensional variations can only be measured on the mysterious “sub-atomic” level? We hate to break it to you but these particular nuts are no different, they are quite ordinary and common.

    16,10 kr
    På lager 1-2 dage
  • 16,10 kr På lager 1-2 dage

    Standard Philips-head 4-40 screws. They are 1" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

    16,10 kr
    På lager 1-2 dage
  • 16,10 kr På lager 1-2 dage

    Standard Philips-head 4-40 screws. They are ¾" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

    16,10 kr
    På lager 1-2 dage
  • 10,00 kr Levering 1-3 dage
    Tilbud!

    Før: 39kr

    10,00 kr
    Levering 1-3 dage
  • 687,00 kr På lager

    FreaksARM is a supper low-cost and miniature desktop robot Arm. It’s 4-axis robot arm and arduino-based. It is made up of laser cut wood parts and can be assembled in 1 hour. It is very suitable for children education and to help achieve the purpose of edutainment during familiarizing mechanical arm’s assembly structure and connection. It’s affordable,...

    687,00 kr
    På lager
  • 16,10 kr På lager 1-2 dage

    We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and is hand picked only at the peak of the season. Or how they are expertly hand-ground by a 6th generation master grinder. And how every nut passes a rigorous 19-point inspection process at each step of the process. And how each...

    16,10 kr
    På lager 1-2 dage
  • 16,60 kr På lager 1-2 dage

    These 1.50" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    16,60 kr
    På lager 1-2 dage
  • 677,00 kr På lager

    FreaksCar is a robotic development platform, completely open source, new affordable, easy to use, no soldering no wires, and fun intro to programming, electronics, and robotics.

    677,00 kr
    På lager
  • 61,30 kr På lager 1-2 dage

    This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. We recommend our small servo motors listed below.

    61,30 kr
    På lager 1-2 dage
  • 449,50 kr På lager 1-2 dage

    This Multi-Chassis Basic 4WD Kit includes four 48:1 DC gearboxes that independently drive each of the 78mm high-profile wheels. The larger wheels give you clearance for driving through more difficult terrain like grass or sand. The gearboxes have a metal output shaft for more durability. Each side of the 2.5mm thick aluminum frame comes cut with plenty of...

    449,50 kr
    På lager 1-2 dage
  • 72,50 kr På lager 1-2 dage

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    72,50 kr
    På lager 1-2 dage
  • 84,80 kr På lager 1-2 dage

    These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option than set screw hubs if you don’t want to risk damaging whatever you need clamped. These clamping hubs have a ¼" bore, four 6-32 tapped holes, one 6-32 machine screw for tightening, and utilizes the...

    84,80 kr
    På lager 1-2 dage
  • 84,80 kr På lager 1-2 dage

    These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option than set screw hubs if you don’t want to risk damaging whatever you need clamped. These clamping hubs have a 3/8" bore, four 6-32 tapped holes, one 6-32 machine screw for tightening, and utilizes the 0.77"...

    84,80 kr
    På lager 1-2 dage
  • 625,00 kr På lager, Leveringstids 1-2 dage.

    These wheels are the updated version of Fingertech’s original Mecanum wheels and they’ve made some awesome improvements. First of all, they moved to an all-metal aluminum design, making them more rugged. Secondly, the rollers are now supported on either side (instead of from the center) which reduces the friction from rollers rubbing against hubs.

    625,00 kr
    På lager, Leveringstids 1-2 dage.
  • 109,50 kr 39 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Dual gearbox from Tamiya. This is an excellent way to get started quickly with robotics! You may have read many websites about servos, gear head motors, DC motors, stepper motors, and the pit-falls associated with each. We swear by these gearboxes because of their price, their ease in assembly, and the ability to be controlled by low-cost motor driver...

    109,50 kr
    39 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 68,40 kr 39 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Omni-what? Imagine a robot with the dual-motor gear box. The robot can pivot in one spot, but it must also allow the other wheels on the drive train to move or slide during a turn. This caster allows the robot to rotate and pivot in all directions - omni-directional - without the need for complex steering mechanisms.

    68,40 kr
    39 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 99,50 kr 78 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Track set for tank treads. Use these treads to create your own tank setup. These work superbly with the Tamiya dual gear box.

    99,50 kr
    78 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 66,30 kr 96 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    This rugged wheel is designed to fit securely on the output shafts of the micro and mini metal geramotors. These gearmotors should be mounted onto the side of the hub with the protruding teeth. The output shaft will slide into the socket easily at first but will achieve a snug fit when pressed through to the other edge of the hub.

    66,30 kr
    96 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 39,30 kr 44 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    The total height of this ball caster is 0.4" with no spacers. You can also adjust the height by adding the spacers.

    39,30 kr
    44 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 39,30 kr 99 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    The total height of this ball caster is 0.4" with no spacers. You can also adjust the height by adding the spacers.

    39,30 kr
    99 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 8,10 kr 19 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    0.3125" tall, brass swage attachable stand off. Non-threaded.

    8,10 kr
    19 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 8,10 kr 332 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    0.218" tall, brass swage attachable stand off. Non-threaded.

    8,10 kr
    332 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 0,80 kr 5632 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These are standard black button head screws 5/16"“ long with 8-32 thread.

    0,80 kr
    5632 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 1,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/8993

    These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 nut.

    1,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/8993
  • 1,60 kr 535 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below.

    1,60 kr
    535 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 74,90 kr 55 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    The universal aluminum mounting hub allows you to mount custom wheels and mechanisms to 5 mm motor shafts. The hubs are sold in pairs. The set includes one Allen wrench and two 4-40 set screws for securing the hubs to motor shafts.

    74,90 kr
    55 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 749,50 kr 3 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    At the heart of the Microbot is a motherboard which contains a powerful PICAXE 20x2 microcontroller which can be programmed using flowcharts, the ‘Logicator for PICAXE’ software, or in the PICAXE BASIC language. The Microbot can be programmed on Windows, Linux, and Mac systems.

    749,50 kr
    3 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 5,00 kr 445 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 90 degree angles, mounting accelerometers, gryros, etc. They can also be used on the universal plate set for mounting all sorts of sensors and such.

    5,00 kr
    445 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 8,10 kr 261 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These are clear, self-adhesive silicone bumpers 8mm in diameter and about 2mm tall. These bumpers raise your PCB or project up off your desk which helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. These clear silicone bumpers...

    8,10 kr
    261 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 16,10 kr 379 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Standard Philips-head 4-40 screws. They are ½" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

    16,10 kr
    379 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 16,10 kr 495 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    There are your standard Philips-head 4-40 screws. They are ¼" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

    16,10 kr
    495 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 79,60 kr 599 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Note: This is not a gravity-feed solenoid. This means that you will need enough water pressure to fully open the valve. Check the datasheet below for exact details. It operates at a minimum of around 3 PSI, allowing around 3 L/min of flow. Although the datasheet shows the valve working at 220 VAC, it’s actually 12 VDC. Our 350 GPH pump does not have...

    79,60 kr
    599 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 16,10 kr 433 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Description: These are standard locknuts with 4-40 thread. For use with 4-40 machine screws. They have a nylon insert that allows them to stay tightly in place.

    16,10 kr
    433 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 12,10 kr 47 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. They can also be used as feet for enclosures. These are self-adhesive and 16.5mm in diameter and about 10mm tall....

    12,10 kr
    47 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 46,70 kr 20 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Metal long standoffs: 1" long x ¼" OD. Used to get your proto board up off the table. #4-40 thread. Fits most development boards with available holes. Don’t forget the screws, found below.

    46,70 kr
    20 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 31,70 kr 89 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below.

    31,70 kr
    89 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 20,00 kr 130 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Sometimes you need to fasten something down with a nut, but don’t want to worry about shorting anything. A nylon nut can save you the hassle of shorting out the ground plane on a PCB without enough spacing around the mounting hole.

    20,00 kr
    130 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 31,70 kr 375 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look.

    31,70 kr
    375 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 2 499,50 kr 26 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Each of the six motors are mounted on independent suspension and outfitted with 34:1 steel gearboxes (no more stripped gears!). The motors are wired together on a terminal strip inside the 2mm thick anodized metal frame and can be controlled on two channels (left and right). The entire chassis is perforated with 10mm pitched, 4mm diameter mounting holes...

    2 499,50 kr
    26 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 35,50 kr 22 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    The elbow hinge allows beams to pivot on the edge of the profile with about 180 degrees of rotation. In other words, at fully-closed the two beams will be parallel to each other. The bushing that connects the joint works with a 3mm OD shaft if you want to run a shaft through several joints.

    35,50 kr
    22 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 2 388,70 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    The new Deluxe Kit comes tricked out with the precision egg coupler, a 5/64" balldriver, a bracket to hang your hex driver on and all brass thumbscrews! The precision egg coupler provides improved grip over the original polyurethane cup design so you can print with more accuracy and all brass thumbscrews keep everything tight and sturdy.

    2 388,70 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 8,10 kr 601 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    This pack of 4-40 screws comes with a matching hex key. Each screw is 10mm in length. These are left over production stock from the original version of the BigTime Watch Kit so they won’t be around for long.

    8,10 kr
    601 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 39,50 kr 144 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look.

    39,50 kr
    144 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 325,10 kr 2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Cubelets are magnetic blocks that can be snapped together to make an endless variety of robots. You can build robots that drive around on a tabletop, respond to light, sound, and temperature, and have surprisingly lifelike behavior. But instead of programming that behavior, you snap the cubelets together and watch the behavior emerge like with a flock of...

    325,10 kr
    2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 325,10 kr 2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Cubelets are magnetic blocks that can be snapped together to make an endless variety of robots. You can build robots that drive around on a tabletop, respond to light, sound, and temperature, and have surprisingly lifelike behavior. But instead of programming that behavior, you snap the cubelets together and watch the behavior emerge like with a flock of...

    325,10 kr
    2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 325,10 kr 1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Cubelets are magnetic blocks that can be snapped together to make an endless variety of robots. You can build robots that drive around on a tabletop, respond to light, sound, and temperature, and have surprisingly lifelike behavior. But instead of programming that behavior, you snap the cubelets together and watch the behavior emerge like with a flock of...

    325,10 kr
    1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 325,10 kr 3 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Cubelets are magnetic blocks that can be snapped together to make an endless variety of robots. You can build robots that drive around on a tabletop, respond to light, sound, and temperature, and have surprisingly lifelike behavior. But instead of programming that behavior, you snap the cubelets together and watch the behavior emerge like with a flock of...

    325,10 kr
    3 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 351,60 kr 1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Cubelets are magnetic blocks that can be snapped together to make an endless variety of robots. You can build robots that drive around on a tabletop, respond to light, sound, and temperature, and have surprisingly lifelike behavior. But instead of programming that behavior, you snap the cubelets together and watch the behavior emerge like with a flock of...

    351,60 kr
    1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 449,50 kr 92 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    This Multi-Chassis Tank Kit includes two 48:1 DC gearboxes with a metal final output gear and shaft that independently drive each 52mm tank treads making this chassis able to drive around tough terrain like tall grass and sand. Each side of the 2.5mm thick aluminum frame comes cut with plenty of attachment points to add a multitude of different robot...

    449,50 kr
    92 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 159,10 kr 2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These flat aluminum clamping hubs are perfect for heavy duty applications that need shafting or tubing 1" in diameter secured safely. These clamping hubs have a 1" bore, an outer diameter of 1.967", four ¼-20 tapped holes, four ¼" through holes, and one ¼-20 machine screw for tightening.

    159,10 kr
    2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 68,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12100

    Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thickness of 0.25”, a 0.375” bore bearing.

    68,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12100
  • 35,20 kr 39 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 8" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    35,20 kr
    39 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12102

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12102
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12103

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12103
  • 74,10 kr 18 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These set screw hubs make it capable to connect a micro gearmotor with a 3mm bore to a precision disk wheel or other object with a 0.77" hub pattern that needs to be rotated. These hubs have an outer diameter of 1", a bore of 3mm, a 6-32 set screw, and utilizes the 0.77" hub pattern.

    74,10 kr
    18 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 53,10 kr 5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    53,10 kr
    5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12107

    These clear yellow precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12107
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12108

    Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0.77" hub pattern and is precision machined from 6061 T6 aluminum. The set-screw is 10-32 and uses a 3/32” hex key. This hub has a 1/8" bore.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12108
  • 95,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12109

    These hub-mountable aluminum pulleys can be used to drive wheels or other pulleys with ¼” or ⅛” belts. They have an outer diameter of 2.125”, a bore of 0.50”, and utilizes the 0.77” and 1.5" hub pattern.

    95,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12109
  • 84,80 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thickness of 0.25”, a 0.75” bore bearing.

    84,80 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 137,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12111

    These pinion gears attach to a 6mm D-shaft or gear motor using a setscrew. These gears have 20 teeth with a gear pitch of 32P, an outer diameter of 0.688”, and a bore of 6mm.

    137,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12111
  • 21,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12112

    These plastic shaft spacers have an inner diameter of 1/2” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

    21,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12112
  • 19,10 kr 5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 2" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    19,10 kr
    5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12114

    These un-threaded aluminum clamping hubs are perfect for standard applications that need shafting or tubing 1" in diameter secured safely. These clamping hubs have a 1" bore, an outer diameter of 1.31", four 6-32 through holes, and one ¼-20 x ½" machine screw for tightening.

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12114
  • 10,20 kr 16 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    10,20 kr
    16 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 55,40 kr 9 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 12" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    55,40 kr
    9 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 27,80 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 4" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    27,80 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12119

    These orange precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12119
  • 61,20 kr 21 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    61,20 kr
    21 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 74,10 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These heavy duty wheels have a diameter of 4” and a width of 1”. They have a hard inner plastic core and a smooth outer rubber tire. These wheels utilize the .77” hub pattern and are ideal for any larger robot you create.

    74,10 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 14,00 kr 5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 2" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    14,00 kr
    5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr 19 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or two different-sized shafts. These shaft couplers have a length of 0.75”, a outer diameter of 0.42”, and couple 1/4” to 3/16” shafts.

    61,20 kr
    19 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 21,60 kr 2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Screw plates make it easy to create a strong joining point between our channel pieces. Te small screw plate is 0.784" square, has 4 6-32 tapped holes, and utilizes the 0.77" hole pattern, which makes it easy to join channels together easily.

    21,60 kr
    2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 49,60 kr 2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These adapters are ideal for mounting two different hub patterns: mating hubs to gears, sprockets, or wheels.

    49,60 kr
    2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 8,90 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    8,90 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 17,80 kr 1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 2" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    17,80 kr
    1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 34,00 kr 17 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Screw plates make it easy to create a strong joining point between our channel pieces. The ‘large’ screw plate is 1.3" square, has four 6-32 tapped holes, and utilizes the 1.5" hole pattern, which makes it easy to join channels together easily.

    34,00 kr
    17 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 74,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12134

    These blue precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    74,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12134
  • 16,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12135

    These 5" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    16,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12135
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12136

    These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or two different-sized shafts. These shaft couplers have a length of 0.75”, a outer diameter of 0.42”, and couple 1/8” to 1/8" shafts.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12136
  • 40,00 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 7" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    40,00 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 20,30 kr 6 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    20,30 kr
    6 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 32,70 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12139

    These gray “skate” wheels have an outer diameter of 2.975”, an inner diameter of 0.87”, and a width of 0.94”. When used in conjunction with the skate wheel adapters (check below), you can use them with Actobotics motors and shafts, or use them with standard skate bearings.

    32,70 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12139
  • 137,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12140

    These pinion gears attach to a 6mm D-shaft or gear motor using a setscrew. These gears have 32 teeth with a gear pitch of 32P, an outer diameter of 1.063”, and a bore of 6mm.

    137,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12140
  • 71,40 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 12" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    71,40 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 159,10 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 20 teeth with a gear pitch of 32P, an outer diameter of 0.688”, and utilize the C1 Hitec servo spline.

    159,10 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 74,10 kr 11 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Quad block bearing mounts attach to the inside of a channel and have a ball bearing with a 3/8” bore for shafts. These bearing mounts have a width of 1.32”, a thickness of 0.25”, a 0.375” bore bearing, and utilize the 0.77” hub pattern.

    74,10 kr
    11 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 20,30 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12149

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    20,30 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12149
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12151

    These clear pink precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12151
  • 61,20 kr 12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    61,20 kr
    12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 86,90 kr 5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 18" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    86,90 kr
    5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 50,10 kr 256 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Note: This belt is sold by the foot in custom lengths. No returns will be accepted for custom cut lengths.

    50,10 kr
    256 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12157

    Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0.77" hub pattern and is precision machined from 6061 T6 aluminum. The set-screw is 10-32 and uses a 3/32” hex key. This hub has a 4mm bore.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12157
  • 137,80 kr 24 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These pinion gears attach to a ¼” D-shaft or gear motor using a setscrew. They have 16 teeth with a gear pitch of 32P, an outer diameter of 0.563”, and a bore of 0.25”.

    137,80 kr
    24 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 15,30 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12159

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    15,30 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12159
  • 41,20 kr 16 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 10" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    41,20 kr
    16 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 68,40 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These zinc-plated socket head machine screws are 1-½"” long and have a tread pitch of 6-32. Sold in packs of 25.

    68,40 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 79,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12163

    These black precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    79,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12163
  • 72,50 kr 51 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    72,50 kr
    51 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 19,10 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 4" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    19,10 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr 9 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These adapters are ideal for mounting two different hub patterns: mating hubs to gears, sprockets, or wheels.

    61,20 kr
    9 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 55,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12169

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    55,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12169
  • 11,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12170

    These 6" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    11,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12170
  • 49,60 kr 3 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    49,60 kr
    3 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 121,90 kr 1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 24" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    121,90 kr
    1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 95,40 kr 25 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    This tube clamp allows you to secure two 1" bore tubes at 90 degrees. The tubes are held securely in place by set screws. Precision machined from 6061-T6 aluminum. these clamping hubs offer several advantages over set screw hubs. First, they do not damage the shaft which they are attached. Second, they offer more holding power in high torque applications.

    95,40 kr
    25 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12177

    This 1/2” Bore Tube Clamp Hub offers a great way to attach gears, sprockets, wheels or other items to hollow 1/2” aluminum tubes. The tube clamp has 4 equally spaced 6-32 tapped holes, in a 0.77" hole pattern. Precision machined from 6061-T6 aluminum. these clamping hubs offer several advantages over set screw hubs. First, they do not damage the shaft...

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12177
  • 37,60 kr 33 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 9" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    37,60 kr
    33 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 26,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12179

    These 9" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    26,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12179
  • 72,50 kr 12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These dolly wheel drive plates provide you with a way to create an easy to assemble, low friction, drive system. The idler A type plates are designed to work with 1” - 2” OD aluminum tubing or PVC pipe from your local hardware store. Each dolly wheel drive plate when fully assembled can hold up to 150lbs, utilizes the 1.5" hub pattern and are sold in...

    72,50 kr
    12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 25,30 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 2" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    25,30 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 48,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12183

    These 10" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    48,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12183
  • 159,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12184

    These servo gears are made specifically to fit a Futaba 3F servo spline, allowing you to mate other gears to your servo. They have 20 teeth with a gear pitch of 32P, an outer diameter of 0.688”, and utilize the 3F Futaba servo spline.

    159,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12184
  • 43,60 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 8" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    43,60 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12186

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12186
  • 74,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12187

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    74,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12187
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12188

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12188
  • 30,30 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 7" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    30,30 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 64,90 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12191

    These zinc-plated socket head machine screws are 1-3/8"” long and have a tread pitch of 6-32. Sold in packs of 25.

    64,90 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12191
  • 21,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12193

    These plastic shaft spacers have an inner diameter of 1” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

    21,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12193
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12194

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12194
  • 49,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12195

    These clear precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    49,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12195
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12196

    Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0.77" hub pattern and is precision machined from 6061 T6 aluminum. The set-screw is 10-32 and uses a 3/32” hex key. This hub has a 5/16" bore.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12196
  • 55,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12197

    These 12" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    55,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12197
  • 64,90 kr 16 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These adapters are ideal for mounting two different hub patterns: mating hubs to gears, sprockets, or wheels.

    64,90 kr
    16 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12201

    These black precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12201
  • 31,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12202

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    31,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12202
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12204

    These clear precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12204
  • 137,80 kr 6 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 84 teeth with a gear pitch of 32P, an outer diameter of 2.688”, a bore of 1”, and utilizes the 1.5” hub pattern.

    137,80 kr
    6 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 64,90 kr 22 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These hub-mountable aluminum sprockets can be used to drive wheels or other sprockets with 0.25” chain. They have 16 teeth with a spacing of 0.25”, an outer diameter of 1.407”, a bore of 1/2”, and utilizes the 0.77” hub pattern.

    64,90 kr
    22 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 32,70 kr 15 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 2" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    32,70 kr
    15 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 119,30 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12209

    These hub-mountable aluminum pulleys can be used to drive wheels or other pulleys with ¼” or ⅛” belts. They have an outer diameter of 3.125”, a bore of 1”, and utilizes the 1.5” hub pattern.

    119,30 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12209
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12210

    These orange precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12210
  • 61,20 kr 59 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or two different-sized shafts. These shaft couplers have a length of 0.75”, a outer diameter of 0.42”, and couple 1/4” to 6mm shafts.

    61,20 kr
    59 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 25,30 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 2" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    25,30 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12213

    These clear precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12213
  • 84,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12214

    These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option than set screw hubs if you don’t want to risk damaging whatever you need clamped. These clamping hubs have a ½" bore, four 6-32 tapped holes, one 6-32 machine screw for tightening, and utilizes the...

    84,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12214
  • 42,40 kr 35 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 10" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    42,40 kr
    35 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 57,70 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 12" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    57,70 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 108,10 kr 13 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 10" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    108,10 kr
    13 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 32,70 kr 10 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These orange “skate” wheels have an outer diameter of 2.975”, an inner diameter of 0.87”, and a width of 0.94”. When used in conjunction with the skate wheel adapters (check below), you can use them with Actobotics motors and shafts, or use them with standard skate bearings.

    32,70 kr
    10 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 84,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12220

    This tube clamp allows you to secure two 5/8" bore tubes at 90 degrees. The tubes are held securely in place by set screws. Precision machined from 6061-T6 aluminum. these clamping hubs offer several advantages over set screw hubs. First, they do not damage the shaft which they are attached. Second, they offer more holding power in high torque applications.

    84,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12220
  • 106,00 kr 37 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    106,00 kr
    37 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12224

    These clear orange precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12224
  • 137,80 kr 1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These pinion gears attach to a ¼” D-shaft or gear motor using a setscrew. They have 24 teeth with a gear pitch of 32P, an outer diameter of 0.813”, and a bore of 0.25”.

    137,80 kr
    1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12226

    These white precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12226
  • 137,80 kr 14 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 84 teeth with a gear pitch of 32P, an outer diameter of 2.688”, a bore of 0.50”, and utilizes the 0.77” and 1.5" hub pattern.

    137,80 kr
    14 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 39,30 kr 17 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These zinc-plated socket head machine screws are 9/16"” long and have a tread pitch of 6-32. Sold in packs of 25.

    39,30 kr
    17 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 24,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12230

    These 3" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    24,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12230
  • 159,10 kr 5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 32 teeth with a gear pitch of 32P, an outer diameter of 1.063”, and utilize the C1 Hitec servo spline.

    159,10 kr
    5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 137,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12232

    These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 48 teeth with a gear pitch of 32P, an outer diameter of 1.563”, a bore of 0.50”, and utilizes the 0.77” hub pattern.

    137,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12232
  • 14,00 kr 20 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These lipped Rubber Rings have an inner diameter of 4.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement for Precision Disk Wheels or can wrap around the outside edge of another flat disc to make the ring a simple tire.

    14,00 kr
    20 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 26,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12234

    These 4" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    26,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12234
  • 26,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12235

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    26,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12235
  • 40,00 kr 16 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 6" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    40,00 kr
    16 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 72,90 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12240

    These hub-mountable aluminum sprockets can be used to drive wheels or other sprockets with 0.25” chain. They have 32 teeth with a spacing of 0.25”, an outer diameter of 2.688”, a bore of 1/2”, and utilizes the 0.77” and 1.5" hub pattern.

    72,90 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12240
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12241

    These red precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12241
  • 42,40 kr 1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 6" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    42,40 kr
    1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12243

    These aluminum channel brackets (A type) provide you with a simple way to join a heavy duty wheel and motor to your electromechanical project. These channel brackets can also serve as connection points for servos, shafts, and other channels while still providing an easy to assemble structure. Each channel bracket has exterior dimensions of 1.5" wide by 3"...

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12243
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12244

    These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or two different-sized shafts. These shaft couplers have a length of 0.75”, a outer diameter of 0.42”, and couple 1/4” to 1/8” shafts.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12244
  • 74,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12245

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    74,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12245
  • 16,60 kr 11 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    16,60 kr
    11 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 95,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12249

    These 90° clamping hubs provide a great way to attach a 5/8” diameter tube or shaft to a ½" diameter hub. These clamping hubs have a 5/8" diameter bore for shaft connection, a ½" diameter bore for hub connection, four 6-32 tapped holes, four 6-32 through holes, two 6-32 machine screw for tightening, and utilizes the 0.77" hub pattern.

    95,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12249
  • 84,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12250

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    84,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12250
  • 61,20 kr 50 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or two different-sized shafts. These shaft couplers have a length of 0.75”, a outer diameter of 0.42”, and couple 1/4” to 1/4” shafts.

    61,20 kr
    50 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 37,60 kr 42 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    37,60 kr
    42 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 127,20 kr 13 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 12" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    127,20 kr
    13 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 54,20 kr 42 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 10" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    54,20 kr
    42 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr 21 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    61,20 kr
    21 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 137,80 kr 2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 76 teeth with a gear pitch of 32P, an outer diameter of 2.488”, a bore of 1”, and utilizes the 1.5” hub pattern.

    137,80 kr
    2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 24,10 kr 3 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 4" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    24,10 kr
    3 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 159,10 kr 10 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 12 teeth with a gear pitch of 32P, an outer diameter of 0.438”, and utilize the C1 Hitec servo spline.

    159,10 kr
    10 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 7,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12259

    These 1" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    7,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12259
  • 68,80 kr 13 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These flat bearing mounts attach to the face of a channel or plate and have a ball bearing with a 3/8” bore for shafts. They can be used in conjunction with angle brackets to be mounted inside channels or in other configurations. These bearing mounts have a width of 1.31”, a thickness of 0.20”, a 0.375” bore bearing, and utilize the 1.5” hub pattern.

    68,80 kr
    13 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 137,80 kr 14 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 80 teeth with a gear pitch of 32P, an outer diameter of 2.563”, a bore of 0.50”, and utilizes the 0.77” and 1.5" hub pattern.

    137,80 kr
    14 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 16,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12263

    These 1" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    16,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12263
  • 84,80 kr 18 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option than set screw hubs if you don’t want to risk damaging whatever you need clamped. These clamping hubs have a 6mm bore, four 6-32 tapped holes, one 6-32 machine screw for tightening, and utilizes the 0.77"...

    84,80 kr
    18 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 137,80 kr 9 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 64 teeth with a gear pitch of 32P, an outer diameter of 2.063”, a bore of 0.50”, and utilizes the 0.77” and 1.5" hub pattern.

    137,80 kr
    9 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 49,60 kr 14 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These channel brackets (C type) provide you with an attachment point for a channel mountable gearbox kit. They share the same 0.5" center hole and 0.77" and 1.5" mounting hub patterns as the channels.

    49,60 kr
    14 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 90,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12267

    These round pillow block bearing mounts attach to the outside of a channel and have a ball bearing with a 1” bore for shafts and tubes. These bearing mounts have a width of 1.44”, a thickness of 0.33”, a 1” bore bearing.

    90,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12267
  • 27,80 kr 9 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 6" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    27,80 kr
    9 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 21,60 kr 42 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These plastic shaft spacers have an inner diameter of 5/8” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

    21,60 kr
    42 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 72,50 kr 61 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    72,50 kr
    61 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 53,10 kr 14 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 10" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    53,10 kr
    14 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr 11 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or two different-sized shafts. These shaft couplers have a length of 0.75”, a outer diameter of 0.50”, and couple 5/16” to 5/16" shafts.

    61,20 kr
    11 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 5,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12276

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    5,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12276
  • 106,00 kr 10 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These linkages use 6-32 screw rod (not included) to create custom arms for just about any application. They have a ¼" free-moving ball (with a 0.14" diameter bore) in the end for smooth movement and easy connectivity. They are sold in packs of 12 and come with cup washers as well.

    106,00 kr
    10 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 16,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12278

    These lipped Rubber Rings have an inner diameter of 5.65", a width of ¼", and a sturdy rubber sidewall. These rings can be used as a replacement for Precision Disk Wheels or can wrap around the outside edge of another flat disc to make the ring a simple tire.

    16,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12278
  • 12,70 kr 25 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 2" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    12,70 kr
    25 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12280

    These orange “skate” wheels have an outer diameter of 4.90”, an inner diameter of 0.87”, and a width of 0.94”. When used in conjunction with the skate wheel adapters (check below), you can use them with Actobotics motors and shafts, or use them with standard skate bearings.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12280
  • 106,00 kr 22 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These square pillow block bearing mounts attach to the inside of a channel and have a ball bearing with a 1” bore for shafts and tubes. These bearing mounts have a width of 1.32”, a thickness of 0.33”, a 1” bore bearing.

    106,00 kr
    22 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 12,70 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12284

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    12,70 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12284
  • 19,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12290

    These 2" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    19,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12290
  • 42,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12293

    These 4" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    42,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12293
  • 37,60 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 8" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    37,60 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 50,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12295

    These zinc-plated socket head machine screws are 3/4” long and have a tread pitch of 6-32. Sold in packs of 25.

    50,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12295
  • 22,80 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    22,80 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 60,00 kr 5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 9" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    60,00 kr
    5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 99,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12300

    These hub-mountable aluminum sprockets can be used to drive wheels or other sprockets with 0.25” chain. They have 48 teeth with a spacing of 0.25”, an outer diameter of 3.823”, a bore of 1”, and utilizes the 1.5” hub pattern.

    99,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12300
  • 43,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12301

    These 10" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    43,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12301
  • 48,40 kr 17 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 9" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    48,40 kr
    17 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 17,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12303

    These 1.75" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    17,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12303
  • 84,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12304

    These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option than set screw hubs if you don’t want to risk damaging whatever you need clamped. These clamping hubs have a 1/8" bore, four 6-32 tapped holes, one 6-32 machine screw for tightening, and utilizes the 0.77"...

    84,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12304
  • 21,60 kr 14 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 7" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    21,60 kr
    14 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12306

    Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0.77" hub pattern and is precision machined from 6061 T6 aluminum. The set-screw is 10-32 and uses a 3/32” hex key. This hub has a 3/8" bore.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12306
  • 66,30 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12307

    These hub-mountable aluminum sprockets can be used to drive wheels or other sprockets with 0.25” chain. They have 24 teeth with a spacing of 0.25”, an outer diameter of 2.049”, a bore of 1/2”, and utilizes the 0.77” hub pattern.

    66,30 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12307
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12308

    These clear yellow precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12308
  • 8,90 kr 10 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 1" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    8,90 kr
    10 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 20,30 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 4" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    20,30 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 57,70 kr 25 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These zinc-plated socket head machine screws are 1-1/8"” long and have a tread pitch of 6-32. Sold in packs of 25.

    57,70 kr
    25 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 32,70 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 4" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    32,70 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 14,00 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12315

    These 4" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    14,00 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12315
  • 49,60 kr 12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    49,60 kr
    12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 84,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12319

    These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option than set screw hubs if you don’t want to risk damaging whatever you need clamped. These clamping hubs have a 3mm bore, four 6-32 tapped holes, one 6-32 machine screw for tightening, and utilizes the 0.77"...

    84,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12319
  • 6,30 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12320

    These 2" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    6,30 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12320
  • 10,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12321

    These 5" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    10,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12321
  • 5,00 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12322

    These 1" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    5,00 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12322
  • 14,00 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12323

    These 1.25" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    14,00 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12323
  • 34,00 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12324

    These 6" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    34,00 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12324
  • 58,90 kr 2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 6" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    58,90 kr
    2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 30,30 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12327

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    30,30 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12327
  • 72,50 kr 48 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These flat bearing mounts attach to the face of a channel or plate and have a ball bearing with a 1/4” bore for shafts. They can be used in conjunction with angle brackets to be mounted inside channels or in other configurations. These bearing mounts have a width of 1.31”, a thickness of 0.20”, a 0.25” bore bearing, and utilize the 1.5” hub pattern.

    72,50 kr
    48 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12329

    These skate wheel adaptors have a diameter of 1”, a width of 0.32”, and utilize the 0.77” hub pattern. These adaptors allow you to attach the 2.975” or 4.90” skate wheels to ¼” drive shafts.

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12329
  • 43,00 kr 1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These zinc-plated socket head machine screws are 5/8” long and have a tread pitch of 6-32. Sold in packs of 25.

    43,00 kr
    1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 72,50 kr 83 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thickness of 0.25”, a 0.25” bore bearing.

    72,50 kr
    83 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12334

    These blue precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12334
  • 29,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12335

    These 10" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    29,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12335
  • 30,30 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12336

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    30,30 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12336
  • 65,60 kr 6 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 6" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    65,60 kr
    6 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 19,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12338

    These 6" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    19,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12338
  • 7,60 kr 2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 3" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    7,60 kr
    2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 15,30 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12340

    These 1.375" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    15,30 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12340
  • 159,10 kr 2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 24 teeth with a gear pitch of 32P, an outer diameter of 0.813”, and utilize the C1 Hitec servo spline.

    159,10 kr
    2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 49,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12342

    These clear yellow precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    49,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12342
  • 10,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12343

    These lipped Rubber Rings have an inner diameter of 1.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement for Precision Disk Wheels or can wrap around the outside edge of another flat disc to make the ring a simple tire.

    10,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12343
  • 20,30 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12344

    These 2.25" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    20,30 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12344
  • 19,10 kr 9 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    19,10 kr
    9 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 49,60 kr 15 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 12" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    49,60 kr
    15 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 72,50 kr 5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Quad hub mounts attach to the inside of a channel at a 90 degree angle providing you with additional attachment points for the open top of a channel. These mounts have a width of 1.32”, a thickness of 0.25”, a 0.50” bore bearing, and utilize the 0.77” hub pattern.

    72,50 kr
    5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 21,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12350

    These plastic shaft spacers have an inner diameter of 1/4” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

    21,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12350
  • 27,80 kr 19 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These zinc-plated socket head machine screws are 3/16” long and have a tread pitch of 6-32. Sold in packs of 25.

    27,80 kr
    19 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12353

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12353
  • 24,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12354

    These 8" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    24,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12354
  • 70,90 kr 12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 16" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    70,90 kr
    12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr 2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These yellow precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    61,20 kr
    2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 80,50 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 10" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    80,50 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 27,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12360

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    27,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12360
  • 84,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12361

    These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option than set screw hubs if you don’t want to risk damaging whatever you need clamped. These clamping hubs have a 5mm bore, four 6-32 tapped holes, one 6-32 machine screw for tightening, and utilizes the 0.77"...

    84,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12361
  • 74,10 kr 5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thickness of 0.25”, a 0.50” bore bearing.

    74,10 kr
    5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 43,60 kr 5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 8" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    43,60 kr
    5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 41,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12364

    These 8" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    41,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12364
  • 25,30 kr 63 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These center hole adaptors come in packs of four, are .08” thick, and have an outer diameter .54”. Their ½” diameter lip allows them to fit snuggly into the large holes on Actobotics™ channels that change them from ½” diameter holes to .14” diameter holes perfect for the 6-32 socket head machine screws. Actobotics is a robotics building system based...

    25,30 kr
    63 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 22,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12366

    These 2.5" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    22,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12366
  • 137,80 kr 1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 72 teeth with a gear pitch of 32P, an outer diameter of 2.312”, a bore of 0.50”, and utilizes the 0.77” and 1.5" hub pattern.

    137,80 kr
    1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 19,10 kr 20 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 3" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    19,10 kr
    20 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 6,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12370

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    6,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12370
  • 22,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12371

    These 5" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    22,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12371
  • 61,20 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These adapters are ideal for mounting two different hub patterns: mating hubs to gears, sprockets, or wheels.

    61,20 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 54,20 kr 23 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 8" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    54,20 kr
    23 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 65,80 kr 12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 14" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    65,80 kr
    12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 74,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12376

    These clear precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    74,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12376
  • 11,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12377

    These 3" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    11,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12377
  • 137,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12378

    These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 100 teeth with a gear pitch of 32P, an outer diameter of 3.188”, a bore of 1”, and utilizes the 1.5” hub pattern.

    137,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12378
  • 74,10 kr 19 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These wide flat bearing mounts attach to the face of a channel or plate and have a ball bearing with a 1/2” bore for shafts. They can be used in conjunction with ServoBlock kits or in other configurations. These bearing mounts have a length of 1.69”, a width of 1.31”, a thickness of 0.20”, and a 1/2” bore bearing.

    74,10 kr
    19 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 50,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12380

    These zinc-plated socket head machine screws are 7/8” long and have a tread pitch of 6-32. Sold in packs of 25.

    50,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12380
  • 74,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12381

    These clear orange precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    74,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12381
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12382

    These red precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a  removable rubber ring for traction.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12382
  • 37,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12383

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    37,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12383
  • 44,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12384

    These 12" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    44,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12384
  • 66,90 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12385

    These black precision disk wheels have an outer diameter of 6”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    66,90 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12385
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12386

    These yellow precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12386
  • 74,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12387

    These black precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    74,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12387
  • 159,10 kr 2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 16 teeth with a gear pitch of 32P, an outer diameter of 0.563”, and utilize the C1 Hitec servo spline.

    159,10 kr
    2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 55,40 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    55,40 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 36,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12391

    These 6" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    36,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12391
  • 11,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12392

    These 2" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    11,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12392
  • 61,30 kr 10 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These zinc-plated socket head machine screws are 1-¼"” long and have a tread pitch of 6-32. Sold in packs of 25.

    61,30 kr
    10 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 31,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12394

    These 12" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    31,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12394
  • 65,60 kr 12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 8" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    65,60 kr
    12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 49,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12396

    These red precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    49,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12396
  • 79,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12397

    Quad block bearing mounts attach to the inside of a channel and have a ball bearing with a 1/2” bore for shafts. These bearing mounts have a width of 1.32”, a thickness of 0.25”, a 0.50” bore bearing, and utilize the 0.77” hub pattern.

    79,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12397
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12398

    These clear orange precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12398
  • 17,80 kr 6 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    17,80 kr
    6 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 34,00 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 6" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    34,00 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 11,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12403

    These lipped Rubber Rings have an inner diameter of 2.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement for Precision Disk Wheels or can wrap around the outside edge of another flat disc to make the ring a simple tire.

    11,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12403
  • 106,00 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12405

    These wheel adaptors allow you to adapt 12mm hex drive wheels to our .770” hub pattern. The recessed .770” pattern allows you to run 6-32 socket head screws into any .770” hub or component that utilizes the .770” hub pattern. Each kit consists of two 2 aluminum mounts and 2 8-32 x 1/2” truss head screws.

    106,00 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12405
  • 51,90 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12406

    These 10" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    51,90 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12406
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12409

    These gray “skate” wheels have an outer diameter of 4.90”, an inner diameter of 0.87”, and a width of 0.94”. When used in conjunction with the skate wheel adapters (check below), you can use them with Actobotics motors and shafts, or use them with standard skate bearings.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12409
  • 51,90 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12410

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    51,90 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12410
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12411

    Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0.77" hub pattern and is precision machined from 6061 T6 aluminum. The set-screw is 10-32 and uses a 3/32” hex key. This hub has a 3/16" bore.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12411
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12412

    These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or two different-sized shafts. These shaft couplers have a length of 0.75”, a outer diameter of 0.42”, and couple 1/4” to 3mm shafts.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12412
  • 137,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12413

    These aluminum double servo hub arms can bolt directly to the aluminum hub on servo power gearboxes via four 6-32 x 3/8" machine screws. Each double hub arm has a length of 6” and utilizes the 0.77” hub pattern.

    137,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12413
  • 72,50 kr 3 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These threaded aluminum clamping hubs are perfect for standard applications that need shafting or tubing 1" in diameter secured safely. These clamping hubs have a 1" bore, an outer diameter of 1.31", four 6-32 tapped holes, and one ¼-20 x ½" machine screw for tightening.

    72,50 kr
    3 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 39,30 kr 33 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These zinc-plated socket head machine screws are 1/2” long and have a tread pitch of 6-32. Sold in packs of 25.

    39,30 kr
    33 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 31,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12416

    These 5" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler.

    31,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12416
  • 100,00 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12417

    These shaft-mountable aluminum timing pulleys use XL timing belts and attach to a 6mm output shaft with a set screw. They have 16 teeth with a gear pitch of 1/5P, an outer diameter of 1”, a bore of 6mm, and requires a belt width of 3/8”.

    100,00 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12417
  • 137,80 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These pinion gears attach to a 6mm D-shaft or gear motor using a setscrew. These gears have 24 teeth with a gear pitch of 32P, an outer diameter of 0.813”, and a bore of 6mm.

    137,80 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 47,20 kr 13 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 8" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    47,20 kr
    13 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 29,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12420

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    29,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12420
  • 25,30 kr 17 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    25,30 kr
    17 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 74,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12422

    These orange precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    74,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12422
  • 31,70 kr 32 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These zinc-plated socket head machine screws are 3/8” long and have a tread pitch of 6-32. Sold in packs of 25.

    31,70 kr
    32 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 37,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12424

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    37,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12424
  • 49,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12425

    These blue precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    49,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12425
  • 32,70 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12426

    These blue “skate” wheels have an outer diameter of 2.975”, an inner diameter of 0.87”, and a width of 0.94”. When used in conjunction with the skate wheel adapters (check below), you can use them with Actobotics motors and shafts, or use them with standard skate bearings.

    32,70 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12426
  • 26,60 kr 51 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 6" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    26,60 kr
    51 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 8,90 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12428

    These 4" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    8,90 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12428
  • 137,80 kr 2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 76 teeth with a gear pitch of 32P, an outer diameter of 2.488”, a bore of 0.50”, and utilizes the 0.77” and 1.5" hub pattern.

    137,80 kr
    2 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 49,60 kr 4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    49,60 kr
    4 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 36,40 kr 1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 5" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    36,40 kr
    1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 72,50 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    72,50 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 74,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12435

    These red precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    74,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12435
  • 61,20 kr 1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or two different-sized shafts. These shaft couplers have a length of 0.75”, a outer diameter of 0.42”, and couple 3/16” to 3/16" shafts.

    61,20 kr
    1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 106,00 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12437

    These heavy duty wheels have a diameter of 6” and a width of 1”. They have a hard inner plastic core and a smooth outer rubber tire. These wheels utilize the 1.5” hub pattern and are ideal for any larger robot you create.

    106,00 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12437
  • 11,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12438

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    11,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12438
  • 8,90 kr 32 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 2" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    8,90 kr
    32 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 159,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12440

    These servo gears are made specifically to fit a Futaba 3F servo spline, allowing you to mate other gears to your servo. They have 16 teeth with a gear pitch of 32P, an outer diameter of 0.563”, and utilize the 3F Futaba servo spline.

    159,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12440
  • 21,60 kr 13 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These plastic shaft spacers have an inner diameter of 3/8” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

    21,60 kr
    13 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 106,00 kr 12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These wheel adaptors allow you to adapt 17mm hex drive wheels to our .770” hub pattern. The recessed .770” pattern allows you to run 6-32 socket head screws into any .770” hub or component that utilizes the .770” hub pattern. Each kit consists of two 2 aluminum mounts, 2 #8 washers, and 2 8-32 x 1/2” truss head screws.

    106,00 kr
    12 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 58,90 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12446

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    58,90 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12446
  • 72,50 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12447

    These blue precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    72,50 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12447
  • 74,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12448

    These clear yellow precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    74,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12448
  • 84,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12449

    These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option than set screw hubs if you don’t want to risk damaging whatever you need clamped. These clamping hubs have a 5/16" bore, four 6-32 tapped holes, one 6-32 machine screw for tightening, and utilizes the 0.77"...

    84,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12449
  • 55,40 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12450

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    55,40 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12450
  • 7,70 kr 15 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    7,70 kr
    15 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 49,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12453

    These white precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    49,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12453
  • 6,30 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12454

    These 1" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    6,30 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12454
  • 84,80 kr 1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option than set screw hubs if you don’t want to risk damaging whatever you need clamped. These clamping hubs have a 4mm bore, four 6-32 tapped holes, one 6-32 machine screw for tightening, and utilizes the 0.77"...

    84,80 kr
    1 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 29,10 kr 7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Screw plates make it easy to create a strong joining point between our channel pieces. The round screw plate is nearly 1" around, has 8 6-32 tapped holes, and utilizes the 0.77" hole pattern, which makes it easy to join channels together easily.

    29,10 kr
    7 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 61,20 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12457

    These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or two different-sized shafts. These shaft couplers have a length of 0.75”, a outer diameter of 0.60”, and couple 3/8” to 3/8" shafts.

    61,20 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12457
  • 57,80 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12458

    These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt. Smooth belts can be used in a variety of applications including...

    57,80 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12458
  • 11,50 kr 14 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 1" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

    11,50 kr
    14 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 24,10 kr 6 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 4" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.

    24,10 kr
    6 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 16,60 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12461

    These 10" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    16,60 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12461
  • 19,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12462

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    19,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12462
  • 34,00 kr 5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 3" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    34,00 kr
    5 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 74,10 kr 8 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These plastic chains come in 1ft lengths preassembled with 48 individual and snapable bits, they have a tensile strength of 55 lbs, and 0.25” tooth spacing.

    74,10 kr
    8 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 66,90 kr 11 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    These 7" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    66,90 kr
    11 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 106,00 kr 8 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex electromechanical prototypes or finished projects a reality.

    106,00 kr
    8 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 84,80 kr 6 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

    Quad block bearing mounts attach to the inside of a channel and have a ball bearing with a 5/8” bore for shafts. These bearing mounts have a width of 1.32”, a thickness of 0.25”, a 0.625” bore bearing, and utilize the 0.77” hub pattern.

    84,80 kr
    6 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter
  • 74,10 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12469

    These yellow precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

    74,10 kr
    Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12469
  • 87,90 kr Udsolgt ved leverandør, se leverandørens leveringstid https://www.sparkfun.com/products/12470

    These 12" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

    87,90 kr
    Udsolgt ved leverandør, se leverandørens leveringstid ht