Kasser / sortiment

Arduino Project Enclosure

PRT-10088

Ny vare

It has room internally for an Arduino and a shield. It even has a removable tab mated for use with an Ethernet shield. It also has a snap-in compartment in the back for accessing switches or connections or battery access.

Flere detaljer

2 Varer

På lager 1-2 dage

Få en mail når varen er på lager
Du får en mail så snart varen er på lager

126,00 kr

Yderligere information

The Arduino enclosure allows you to easily enclose your Arduino main board, Arduino Mega, or some of the other board that fits the Arduino foot print. It simply presses shut, so you don’t have to worry about screws or fasteners.

Note: Some older Arduino boards have a slightly smaller hole near the rear the ICSP connector. To make the case work with these boards simply drill out the hole to 1/8" and you will be fine. Also, with the newer Ethernet Shields, you will need to remove one of the pegs to get everything to fit correctly.

Note: This does not work with the FEZ Domino.

Dimensions: 87x64x28mm

Varetilpasning

Når du har gemt din kundetilpassede vare, skal du huske at tilføje den til din kurv.

loader

* obligatoriske felter