Stik og konnektorer

Stik og konnektorer 7 varer

Viser 1 - 7 af 7
  • 29,50 kr På lager

    This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution.

    29,50 kr
    På lager
  • 29,50 kr På lager

    This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.

    29,50 kr
    På lager
  • 9,70 kr 435 Styk på på fjernlager, bestil før Fredag kl 14 og modtag denne varer Onsdag ugen efter

    Flip-Pins are a fantastic new way to add headers to your breakout board. Designed by Fliptronics, Flip-Pins are the third generation of the Integrated Circuit (IC) pins that can be soldered into a PCB and that look and act as much like an IC pin as possible. With the unique plastic aligner, the pins are held 0.100" apart, with a 0.062" solder tail exposed.

    9,70 kr
    435 Styk på på fjernlager, bestil før Fredag kl 14 og modtag denne varer Onsdag ugen efter
  • 20,80 kr 270 Styk på på fjernlager, bestil før Fredag kl 14 og modtag denne varer Onsdag ugen efter

    Flip-Pins are a fantastic new way to add headers to your breakout board. Designed by Fliptronics, Flip-Pins are the third generation of the Integrated Circuit (IC) pins that can be soldered into a PCB and that look and act as much like an IC pin as possible. With the unique plastic aligner, the pins are held 0.100" apart, with a 0.062" solder tail exposed.

    20,80 kr
    270 Styk på på fjernlager, bestil før Fredag kl 14 og modtag denne varer Onsdag ugen efter
  • 23,90 kr 170 Styk på på fjernlager, bestil før Fredag kl 14 og modtag denne varer Onsdag ugen efter

    Flip-Pins are a fantastic new way to add headers to your breakout board. Designed by Fliptronics, Flip-Pins are the third generation of the Integrated Circuit (IC) pins that can be soldered into a PCB and that look and act as much like an IC pin as possible. With the unique plastic aligner, the pins are held 0.100" apart, with a 0.062" solder tail exposed.

    23,90 kr
    170 Styk på på fjernlager, bestil før Fredag kl 14 og modtag denne varer Onsdag ugen efter
Viser 1 - 7 af 7