El Wire

EL Inverter - Battery Pack

COM-11222

Ny vare

We got a chance to play with these inverters and you can easily hack these to work with our Li-Po batteries (yep, at the fully charged 4.2V). To get inside, you’ll need to remove a pair of screws (one is hiding under the CE sticker) and afterwards you’ll want to wrap things up with electrical tape to avoid getting shocked (it just tingles a little).

Flere detaljer

150 Styk på på fjernlager, bestil før Fredag kl 14 og modtag denne varer Onsdag ugen efter

61,30 kr

Yderligere information

Even though the Tron movies have been out for a while, electroluminescence is still the coolest thing since sliced bread. The only downer is carrying around a battery pack and bulky external inverter. Good news, we’ve found a slim battery-powered inverter for your next small EL project! This little black box takes two AA batteries and has two JST connectors for your EL wire/panel/tape. There are two modes: continuous on and flashing and it even has a belt clip!

The following current readings were taken while the pack was connected to one or more of our 3m EL wire:

  • Single strand always on: 190 to 260mA
  • Single strand blinking: 90 to 120mA
  • Two strands always on: ~300mA
  • Two strands blinking: ~150mA

Different color strands were used but the lengths were identical. Your mileage may vary. If you need to pick up some Li-Po batteries, electrical tape or EL wire to hack your own battery pack, check the related items below!

Features:

  • 20 x 34 x 90mm

Varetilpasning

Når du har gemt din kundetilpassede vare, skal du huske at tilføje den til din kurv.

loader

* obligatoriske felter