SparkFun

ClockIt

KIT-10930

Ny vare

We’ve made some changes to this kit so it’s easier for beginners to solder: The ATMega footprint is wider so you don’t need to bend any pins and we’ve also added some more silkscreen print to better indicate the polarity of the parts.

Flere detaljer

18 Styk på fjernlager bestil før Torsdag kl 15 og modtag denne varer Tirsdag ugen efter

Få en mail når varen er på lager
Du får en mail så snart varen er på lager

299,50 kr

Yderligere information

This is a great kit to learn the basics of soldering. The SparkFun ClockIt is a basic alarm clock with buzzer based on the ever popular ATMega328. If you’re just learning how to solder, this kit should take you 15-20 minutes. If you’re a weathered pro at soldering, this is a great relaxing build that should take 5-10 minutes.

No programmer required. The ATmega comes with firmware installed!

Features:

  • Time (AM/PM)
  • Alarm (On/Off)
  • Snooze (alarm resumes after a 9 minute snooze)

Kit Includes:

  • 1 x ClockIt PCB
  • 1 x ATmega328 (pre-programmed)
  • 1 x 4-digit display
  • 1 x Piezo Speaker
  • 1 x 10uF cap
  • 1 x 0.1uF cap
  • 2 x 22pF caps
  • 1 x 10k resistor
  • 1 x 16MHz crystal
  • 1 x barrel jack
  • 1 x mini power switch
  • 3 x push button reset switches
  • 2 x Screws
  • 2 x Plastic Standoffs
  • 1 x 5V wall wart

Documents:

Varetilpasning

Når du har gemt din kundetilpassede vare, skal du huske at tilføje den til din kurv.

loader

* obligatoriske felter