Monokrom

Relay Expansion Board for Onion Omega

DEV-14444

Ny vare

Each Relay Expansion Board features two electromechanical relays that can switch up to 60W and are rated for a maximum current of 2A with a maximum voltage of 220VDC or 250VAC. The screw terminals allow you to connect a variety of different cables, leads and wires.

Flere detaljer

73 Styk på på fjernlager, bestil før Fredag kl 14 og modtag denne varer Onsdag ugen efter

169,20 kr

Yderligere information

This expansion board also comes with a 3-bit address switch, allowing you to use up to eight relays with a single Omega, meaning you can control up to 16 devices with just one Omega!

The Relay Expansion Board enables your Omega to control two other independent electrical circuits. The circuits are isolated from the Omega and can operate at much higher or lower voltages, so you can control other circuits you’ve built or small household appliances rated up to 60W. The Relay Expansion Board is perfect for home automation projects because it gives you the ability to control other devices remotely using your Omega.

The Onion Omega boards we carry are separated into three different categories: Mainboard, Dock and Expansion Board. This board falls into the Expansion Board category, meaning you will need an Omega Dock that is equipped with a 30-pin Expansion Header like the Expansion Dock or Arduino Dock R2.

Features:

  • Number of Relays: 2
  • Relay Max Voltage: 250VAC
  • Relay Max Current: 2A
  • Relay Max Switching Power: 60W, 62.5VA
  • Relay Typical Switching Time: 1ms
  • Relay Max Switching Time: 3ms
  • 30-pin Expansion Pins

Documents:

Varetilpasning

Når du har gemt din kundetilpassede vare, skal du huske at tilføje den til din kurv.

loader

* obligatoriske felter