Shields

ProtoShield for Arduino Pro Mini

DEV-09709

Ny vare

The shield fits the small form factor of the Arduino Pro Mini - connecting to the ‘top’ four pins on each side of the Mini (‘GND’-‘TXO’ & ‘VCC’-‘RAW’). There are small buses for VCC, GND and RAW. In addition to the power buses, the serial pins are also broken out on the shield.

Flere detaljer

301 Styk på på fjernlager, bestil før Fredag kl 14 og modtag denne varer Onsdag ugen efter

31,70 kr

Yderligere information

The analog and digital pins are not broken out on the shield.

This is a small prototyping shield for the Arduino Pro Mini. If your project requires just a little bit more space for your external circuitry, this might be a perfect addition. 38 unconnected PTHs are provided for your prototyping needs.

Features:

  • VCC, RAW and GND buses
  • Serial (RXI & TXO) pins broken out to small buses
  • Works with both 5V and 3.3V Pro Mini versions
  • Upholds the Pro Mini’s small form factor
  • 38 unconnected PTHs for prototyping

Varetilpasning

Når du har gemt din kundetilpassede vare, skal du huske at tilføje den til din kurv.

loader

* obligatoriske felter